CS-669 Acrylic Lacquer Concrete Sealer
CS-669 is a one component solvent Acrylic Clear Concrete Lacquer. CS-669 is designed for use on concrete, masonry, brick and decorative concrete. CS-669 is a high-gloss, non-yellowing sealer. CS-669 has excellent resistance against water and dirt penetration. CS-669 dustproofs concrete by penetrating surface pores leaving a tough durable film.
if this fits your vehicle.
Description
PRODUCT USES
CS-669 Sealer is recommended as a deep penetrating sealer to protect new and old concrete surfaces from penetration of water, dirt and effects of freeze/thaw cycles. The resulting tight film helps prevent “dusting” of the concrete, spalling, and deterioration. CS-669 is also recommended for masonry and decorative concrete. CS-669 is not recommended for heavy traffic areas. Contact Gulf Coast Paint for Epoxy-Polyurethane systems on heavy traffic areas.
PRODUCT FEATURES
Excellent penetration and high “wetting out” properties.
Excellent adhesion to concrete.
Good water and salt chemical resistance.
Prevents “dusting” by increasing strength of concrete surfaces.
Very fast dry time.
Non-yellowing, high gloss.
Excellent over decorative concrete
Good UV resistance.
Ideal as a dustproofing sealer.
Additional information
| COLOR | Clear |
|---|---|
| GLOSS | High gloss |
| WEIGHT SOLIDS | 34% ± 2% |
| V.O.C. | <630 GMS/L |
| RECOMMENDED COVERAGE | 250-450 sq.ft. per gal (coverage varies due to surface porosity) |
| PACKAGING | 5 Gal. and 55 Gal. |
| MIXING RATIO | One component |
| INDUCTION TIME | None |
| APPLICATION | Low Pressure Sprayer, Mohair roller, Lambswool Applicators |
| APPLICATION TEMPERATURE | 50°F to 100°F |
| MINIMUM RECOAT TIME | @ 75°F: 1 – 2 hours |
| DRY TIME | @ 75°F: 1 Hour |
| TACK FREE | @ 75°F: 15 Min |
| FLASH POINT | 80°F |
| CLEAN UP | S-74 or SA-50 |
| THINNING | None |
| SHELF LIFE | 1 year minimum |
