PC-110 Poly-Chemcure Rust Inhibitive Epoxy Metal Primer
PC-110 is a two component, high build Polyamide Epoxy Rust Inhibitive Primer designed for use as a primer for our Epoxy and Polyurethane Topcoats. PC-110 helps prevent edge failure and film under-cutting of steel surfaces exposed to corrosive atmosphere and chemically aggressive environments. PC-110 can be used where an extended recoat period of up to 6 months is needed. Proper cleaning of the primer must be done after extended time without a top coat to remove any dust, dirt, grease or oil that may have contaminated the surface.
if this fits your vehicle.
Description
PRODUCT USES
Recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc. Excellent for OEM applications where a long recoat window is needed.
PRODUCT FEATURES
Excellent rust preventing properties.
Excellent resistance to “under cutting”.
Good flexibility and abrasion resistance.
Long recoat up to 6 months.
Outstanding adhesion and “wetting out” ability.
Easily applied by conventional or airless spray.
Excellent film build to protect sharp edges.
Great shop coat primer for fabricators
1 Values listed are for Gray, other colors may vary slightly
Additional information
| COLOR | Tile Red, Lt. Gray |
|---|---|
| GLOSS | Flat |
| 1 VOLUME SOLIDS | 55% |
| 1 V.O.C. | 3.3 lbs. or 395 GMS/L |
| COVERAGE (Theoretical) | 880 sq. ft. @ 1.0 mils DFT |
| RECOMMENDED DRY FILM THICKNESS | 3-4 mils DFT @ 220-293 sq. ft. per gal |
| PACKAGING | 5 gal. or 1 gal. kits |
| MIXING RATIO | 4:1 by volume Mix 4 parts Base (Part A) to 1 part Hardener (Part B) |
| INDUCTION TIME | 30 minutes |
| APPLICATION TEMP | 50° – 120°F |
| APPLICATION | Spray, brush or roller |
| POT LIFE | 8-10 hrs. @ 75°F |
| MINIMUM RECOAT TIME | 5-6 hours @ 75°F |
| MAXIMUM RECOAT TIME | 6 months |
| DRY SERVICE TEMP | 170°F max. |
| THINNING | Up to 10% with SA-65 |
| CLEAN UP | SA-17 or S-74 |
| SHELF LIFE | 1 year minimum |
