MCU-192 Clear Aliphatic Moisture Cured Urethane
MCU-192 is a single component, high performing, aliphatic moisture cured clear urethane coating that dries quickly to a hard abrasion resistant film. MCU-192 is used as a topcoat for decorative floors, toppings and pigmented epoxy concrete coatings. Due to its excellent impact and abrasion resistance, MCU-192 is widely used in heavy traffic areas.
if this fits your vehicle.
Description
PRODUCT DESCRIPTION
MCU-192 is a single component, high performing, aliphatic moisture cured clear urethane coating that dries quickly to a hard abrasion resistant film. MCU-192 is used as a topcoat for decorative floors, toppings and pigmented epoxy concrete coatings. Due to its excellent impact and abrasion resistance, MCU-192 is widely used in heavy traffic areas.
PRODUCT USES
MCU-192 is ideal as a clear top coat for color quartz, vinyl/acrylic chip decorative floors, pigmented epoxy and polyurethane coatings, epoxy slurries/mortars, interior wood, brick and warehouse floor coatings. MCU-192 is designed for application in factories, assembly plants, labs, public institutions, schools, garages, showrooms and many other facilities.
PRODUCT FEATURES
Unmodified oil free urethane.
Excellent chemical resistance.
One component, easy to use.
Highly resistant to abrasion and impact.
Non-yellowing.
Extremely hard, yet flexible film
Easy to clean and maintain.
Excellent stain resistance
Topcoat for decorative floors
Water – clear color.
Additional information
| COLOR | Clear |
|---|---|
| FINISH | Gloss |
| VOLUME SOLIDS | 62% |
| V.O.C. | 2.82 lb/gal (338 GMS/L) |
| RECOMMENDED DRY FILM THICKNESS | 2-3 mils DFT @ 300-400 sq. ft. per gal. |
| MIXING RATIO | One component – single package |
| POT LIFE | 1-2 hrs. @ 75°F |
| APPLICATION | Short nap roller, spray, Lambswool applicators,or bristle brush |
| APPLICATION TEMP | 45° – 120°F |
| MIN. RECOAT TIME | 2 hours minimum; 6 hours maximum @ 75°F, 50% R/H |
