Recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc. Excellent for OEM applications where a long recoat window is needed.
Excellent rust preventing properties.
Excellent resistance to “under cutting”.
Good flexibility and abrasion resistance.
Long recoat up to 6 months.
Outstanding adhesion and “wetting out” ability.
Easily applied by conventional or airless spray.
Excellent film build to protect sharp edges.
Great shop coat primer for fabricators
1 Values listed are for Gray, other colors may vary slightly
Tile Red, Lt. Gray
|1 VOLUME SOLIDS||
3.3 lbs. or 395 GMS/L
880 sq. ft. @ 1.0 mils DFT
|RECOMMENDED DRY FILM THICKNESS||
3-4 mils DFT @ 220-293 sq. ft. per gal
5 gal. or 1 gal. kits
4:1 by volume Mix 4 parts Base (Part A) to 1 part Hardener (Part B)
50° – 120°F
Spray, brush or roller
8-10 hrs. @ 75°F
|MINIMUM RECOAT TIME||
5-6 hours @ 75°F
|MAXIMUM RECOAT TIME||
|DRY SERVICE TEMP||
Up to 10% with SA-65
SA-17 or S-74
1 year minimum