Gulf Coast Paint

Epoxy Coatings

PC-240 Poly-Chemcure Water Base Epoxy

Aqua-Tile PC-240 is a uniquely formulated two component, water-based Epoxy Coating which is based on the newest technology of Emulsion Chemistry. PC-240 uses specially selected Co-Polymer resins to produce a hard, high gloss tile-like finish with excellent chemical and abrasion resistance. This non-toxic, low odor Epoxy provides outstanding wash and scrubability, making it ideal as an anti-graffiti coating and where surfaces are exposed to great abuse. PC-240 is recommended as a coating for masonry, wood and primed metal surfaces.

Send Inquiry
SKU PC-240 Category

PRODUCT USES

PC-240 is used to coat walls, floors, equipment, machinery, tanks, vessels, piping structural steel, in the following areas:

I. Industrial
Chemical processing plants, pulp & paper mills, sewage & waste water treatment facilities, electric generating plants, petroleum refineries, food processing, dairies, meat packing, bottling plants, poultry plants, breweries, marine applications, manufacturing plants, computer rooms, and textile mills to name a few.

II. Institutions
Schools, hospitals, nursing & retirement homes, jails, cafeterias, dormitories, restrooms, locker
rooms, showers, kitchens, laundry rooms, laboratories and medical & veterinary clinics.

III. Commercial
Lobbies, entrance & walkways, corridors, offices, waiting rooms, cleaning rooms, restaurants,
shopping centers, supermarkets and warehouses.

PRODUCT FEATURES

Low odor. Eliminates pungent solvent.
Non-toxic in the dry film.
Beautiful tile-like finish and high gloss.
Outstanding chemical and abrasion resistance.
May be applied over conventional paint without wrinkling or lifting.
Good color retention.
Available in wide range of colors.
Easy clean up with soap and water.
Meets all EPA and other air pollution regulations.

Details

COLORS

White, Grays, Pastel colors

FINISH

High Gloss

VOLUME SOLIDS

38%

V.O.C.

263 GMS/L

COVERAGE (Theoretical)

609 sq. ft. at 1.0 mil DFT

PACKAGING

2 & 10 gal. units

MIXING RATIO

1:1 by volume. Mix 1 part Base (Part A) to 1 part Hardener (Part B)

INDUCTION TIME

15-30 minutes

POT LIFE

3-4 hours

APPLICATION

Spray, brush, roller

APPLICATION TEMPERATURE

60°F – 100°F

DRY TIME

8-10 hrs @ 75°F

RECOAT TIME

12-24 hrs @ 75°F

TACK FREE

2-4 hrs @ 75°F

THINNING

Normally none required – up to 1 pint water, if necessary

CLEAN UP

Water

SHELF LIFE

1 year minimum from date of shipment