PC-590 High Build Wet Surface Epoxy Coating
A 100% solids, two component cycloaliphatic epoxy coating. PC-590 provides very low permeability along with excellent impact and abrasion resistance. Formulated with a unique moisture insensitive polymer, PC-590 may be applied on wet surfaces or underwater without effect on cure. A special resin modification produces a low modulus, flexible film, making PC-590 ideal for painting over existing sound paint without “lifting”. Recommended for steel and concrete surfaces. In general, a universal high performance air cured chemical resistant coating. We also offer a higher viscosity cycloaliphatic epoxy coating, PC-591.
if this fits your vehicle.
Description
Additional information
| COLORS | White, Lt. Gray, Med. Gray |
|---|---|
| FINISH | Gloss |
| VOLUME SOLIDS | 100% |
| V.O.C. | 0 GMS/L |
| COVERAGE (Theoretical) | 1,604 sq. ft. at 1.0 mil DFT |
| RECOMMENDED FILM THICKNESS | Two coats at 5-7 dry mils @ 230-320 sq. ft. per gal. |
| PACKAGE | 1 gallon, 4 gallon kits |
| MIXING RATIO | 3:1 by volume. Mix 3 parts Base (Part A) with 1 part Hardener (Part B) |
| INDUCTION TIME | None |
| POT LIFE | 20-30 minutes @ 75°F |
| APPLICATION | Spray, roll, brush |
| APPLICATION TEMPERATURE | 40°F – 120°F |
| DRY SERVICE TEMPERATURE | 180°F |
| THINNING | Up to 20% with S-74 per gallon |
| CLEAN UP | SA-17 or S-74 |
| SHELF LIFE | 1 year minimum |
