Chemical Mastic CM-15 is formulated for use over tightly adherent rusty steel and previously painted surfaces limited to hand or power tool cleaning. Although blasting of steel is the best method of preparation, Chemical Mastic CM-15 will provide excellent adhesion and protection to non-blasted steel surfaces in any industrial facility. Specific areas include structural steel, tanks, vessels, water towers, equipment, pipe lines and racks, metal buildings, fences, catwalks, bridges, railings, fire escapes, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, petroleum refineries, electric generating stations, coal handling operations, marine installations, etc. Chemical Mastic CM-15 can be used as a high performance primer under epoxy, polyurethane, vinyl, acrylic topcoating to upgrade corrosion resistance in severe chemical exposures.
Excellent adhesion to tight rust.
A high build primer or finish coat.
Out performs standard epoxies.re
Excellent against “undercutting”.
Easy to apply, self-priming on steel.
Excellent build to protect sharp edges.
Tight film, low permeability.
Good chemical, abrasion and impact resistance.
Available in many colors.
Available in a low temperature cure & fast cure version.
Standard Industrial Colors, Aluminum, Tint, Deep and Neutral Base
Gloss – 85 ± 5%
3 hours @ 75°F when reduced with S-74
82% ± 3%
8 hours at 75°F (5 dry mils)
1,315 sq.ft. at 1.0 mil DFT
Spray, brush or roller
5.0 – 7.0 dry mils at 188-263 sq. ft. per gallon
|DRY SERVICE TEMPERATURE||
4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B)
1 year minimum
5 gal, 1 gal units
(White) 1.34 LBS/GL (161 GMS/L)