PC-591 High Build Wet Surface Epoxy Coating
A 100% solids, two component Cycloaliphatic Epoxy Coating. PC-591 provides very low permeability along with excellent impact and abrasion resistance. Formulated with a unique moisture insensitive polymer, PC-591 may be applied on wet surfaces, or underwater without effect on cure. A special resin modification produces a low modulus, flexible film, making PC-591 ideal for painting over existing sound paint without “lifting”. Recommended for steel and concrete surfaces. PC-591 is a lower viscosity version of PC-590. PC-591 wet surface epoxy can be rolled without any solvent.
if this fits your vehicle.
Description
PRODUCT USES
A wet surface epoxy recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc. PC-591 is a lower viscosity version of our most popular wet surface epoxy, PC-590.
PRODUCT FEATURES
Self-priming on steel and on most concrete applications.
Can be rolled with no solvent.
Ideal for marginally prepared surface.
Outstanding impact and abrasion.
High film build – 20 mil DFT per coat on horizontal surfaces.
Excellent coating for manholes.
May be applied on wet or under water surfaces.
Meets all EPA and other air pollution regulations
Cures down to 35°F.
Additional information
| COLORS | White, Lt. Gray, Med. Gray |
|---|---|
| VOLUME SOLIDS | 100% |
| V.O.C. | 0 GMS/L |
| POT LIFE | 40-50 minutes @75ºF |
| FINISH | Gloss |
| RECOMMENDED FILM THICKNESS | Two coats at 8-20 dry mils @ 80-200 sq. ft. per gal. |
| PACKAGE | 1 gallon and 4 gallon kits |
| APPLICATION TEMPERATURE | 40ºF – 120ºF |
| DRY SERVICE TEMPERATURE | 170ºF |
| MIXING RATIO | 3:1 by volume. Mix 3 parts Base (Part A) with 1 part Hardener (Part B) |
| APPLICATION | Spray, roll, brush |
| INDUCTION TIME | None |
