CT-377 Antimicrobial HB Gloss Polyurethane
A two component, aliphatic polyurethane coating with excellent gloss and color retention. Gulf-Thane CT-377 cures to a very tough, abrasive resistant film with exceptional exterior durability, chalk resistance, color stability, and long term gloss retention. CT-377 Antimicrobial can provide continuous protection to fight the growth of bacteria, mold and mildew that can cause stains, odors and deterioration of the coating. Antimicrobial technology is built-in to CT-377 during the manufacturing process and becomes an intrinsic part of CT-377 Antimicrobial, inside and at the surface. CT-377 Antimicrobial Polyurethane helps keep substrates cleaner by inhibiting the growth of bacteria, mold and mildew on the surface.
if this fits your vehicle.
Description
PRODUCT USES
Industrial, commercial and a broad range of healthcare facilities all benefit from the added layer of protection provided by CT-377 Antimicrobial Polyurethane by providing continuous protection to fight the growth of bacteria, mold and mildew that can cause stains, odors and deterioration of the coating. Examples include walls, flooring, equipment, tank exteriors and more. Ideal as a top coat for storage tanks, vessels, water towers, structural steel, equipment, pipe lines and racks, exterior of buildings, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, food processing plants and marine installations.
PRODUCT FEATURES
Antimicrobial technology.
Resists mold and mildew.
Easy to clean.
High solids.
Highly resistant to abrasion and impact.
Good chemical and stain resistance.
Outstanding wearing properties.
Excellent gloss and color retention.
High film build.
Non-chalking and non-yellowing.
Additional information
| COLORS | Available in most GCP standard colors and Deep Base and Neutral Base |
|---|---|
| GLOSS | High Gloss |
| VOLUME SOLIDS | 60% ± 2% (white) |
| V.O.C. | 2.83 lbs/gallon or 339 GMS/Liter |
| COVERAGE (Theoretical) | 960 sq. ft. @ 1.0 mil DFT |
| RECOMMENDED FILM THICKNESS | 2.0-5.0 dry mils per coat, 190-480 sq. ft. per gallon |
| PACKAGING | 1 and 5 gallon units |
| MIXING RATIO | 4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B) |
| POT LIFE | 4 – 6 hours @ 75°F |
| DRY SERVICE TEMP. | 250°F |
| RECOAT TIME | 8 – 48 hours @ 75°F |
| APPLICATION | Conventional, airless spray, brush or roll |
| APPLICATION TEMP | 50°F – 120°F |
