PC-650 Heavy Duty Epoxy Non-Skid
PC-650 is a two component heavy duty non-skid Epoxy coating. This high performing coating is ideal for industrial, commercial, marine, and other applications. PC-650 helps to provide slip resistance in wet and slippery conditions. Ideal for both new and old concrete surfaces, interior and exterior surfaces. PC-650 is also designed for application on concrete and steel surfaces. Depending on the application, you can use a squeegee or trowel to get a smoother, less aggressive profile. Rolling the product with a phenolic core roller will give you an aggressive finish. This product meets USDA requirements. *Note: this product may chalk or discolor when used as an exterior finish coat.
if this fits your vehicle.
Description
Additional information
| COLOR | 182 Dark Gray, 231 Light Gray, Safety Yellow, Black (Other colors available on Special Order) |
|---|---|
| GLOSS | Gloss |
| VOLUME SOLIDS | 92 ± 2% |
| V.O.C. | 74 GMS/L (.61 LBS/gal) |
| THEORETICAL COVERAGE | Phenolic Core Roller – approximately 30-40 sq. ft. per gal. Trowel, squeegee – approximately 40-50 sq. ft. per gal. (coverage varies due to surface porosity and desired degree of non-skid |
| RECOMMENDED FILM THICKNESS | 1/32” – 1/16” |
| PACKAGING | 1 gal. and 5 gal. Kits |
| MIXING RATIO | 4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B) |
| INDUCTION TIME | None |
| POT LIFE | @ 75ºF: 1-1/2 hours (Regular Cure); 1 hour (Low Temp. Cure) |
| APPLICATION | Phenolic Core roller cover, trowel or squeegee. |
| APPLICATION TEMPERATURE | 50-120ºF (Regular Cure); 40-100°F (Low Temp Cure) |
| DRY SERVICE TEPERATURE | 160°F |
| THINNING | 5-10% with SA-65, if necessary |
| CLEAN UP | SA-17 or S-74 |
| SHELF LIFE | Minimum 12 months |
