PC-211 Epoxy Flooring Primer/Finish Coat
A two component, solvent based epoxy coating for concrete. PC-211 is designed to be used as a primer or finish coat. PC-211 provides excellent resistance to a wide range of industrial chemicals
if this fits your vehicle.
Description
PRODUCT DESCRIPTION
A two component, solvent based epoxy coating for concrete. PC-211 is designed to be used as a primer or finish coat. PC-211 provides excellent resistance to a wide range of industrial chemicals
PRODUCT USES
Recommended as a finish coat on concrete floors in warehouses, tank pads, production areas, garages, and shop floors. Recommended as a primer under epoxies, polyurethanes and polyaspartics.
PRODUCT FEATURES
Good chemical, abrasion, and impact resistance.
USDA Approvable.
Outstanding adhesion and “wetting out” properties.
Available in wide range of colors.
Very low permeability-tight sealed film.
Self-priming on concrete and steel.
Used as a primer and/or finish coat.
Additional information
| COLOR | Lt. Gray, Med. Gray, Beige, White, Black, Dark Blue |
|---|---|
| FINISH | GLOSS |
| VOLUME SOLIDS | 55% |
| V.O.C. | 390 GMS/L |
| RECOMMENDED DRY FILM THICKNESS | 3-4 mils DFT @ 220-290 sq. ft. per gal. |
| MIXING RATIO | 1:1 by volume. Mix 1 parts Base (Part A) to 1 part Hardener (Part B) |
| INDUCTION TIME | 15 min. |
| POT LIFE | 4-5 hrs. @ 75°F |
| APPLICATION | Spray, Brush, or Roller |
| APPLICATION TEMP | 45° – 120°F |
| MIN. RECOAT TIME | 4-6 hours @ 75°F |
