PRODUCT USES
Excellent as a non-skid for trailers, car haulers, tow trucks, aisle-ways, parking decks, platforms, concrete slabs, bridges, loading docks, ramps, exterior walks, steps, production areas, garages, car haulers, seafood processing areas, canneries, meat packing plants, bottlers, poultry plants, chemical plants, paper mills, schools & public institutions, theme parks, oil refineries, water treatment plants, breweries, floors, steps and wash down areas.
PRODUCT FEATURES
Used on ramps and walkways
Non-skid for car haulers & trailers
Provides safer footing and traction
Good abrasion and impact
Heavy duty non-skid resistance
Ready to use non-skid coating
Good water, salt and chemical resistance
Easy to apply
Excellent coating for Diamond Plate
Designed for wet areas
Details
| COLORS | 182 Dark Gray, 231 Light Gray, Safety Yellow, Black (Other colors available on Special Order) |
|---|---|
| FINISH | Gloss |
| VOLUME SOLIDS | 91 ± 2% |
| V.O.C. | 0 GMS/L |
| COVERAGE (Theoretical) | Phenolic Core Roller – approximately 30-40 sq. ft. per gal. Trowel, squeegee – approximately 40-50 sq. ft. per gal. (coverage varies due to surface porosity and desired degree of non-skid) |
| RECOMMENDED DRY FILM THICKNESS | 1/32” – 1/16” |
| PACKAGING | 1 gal. and 5 gal. Kits (special order only) |
| MIXING RATIO | 4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B) |
| APPLICATION | 4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B) |
| POT LIFE | @ 75ºF: 1-1/2 hours (Regular Cure); 1 hour (Low Temp. Cure) |
| APPLICATION TEMPERATURE | 50-120ºF (Regular Cure); 40-100°F (Low Temp Cure) |
| CURE TIME | @ 75ºF: 8 hours (Regular Cure); 6 hours (Low Temp. Cure) |
| DRY SERVICE TEMPERATURE | 160°F |
| THINNING | 5-10% with SA-65, if necessary |
| CLEAN UP | SA-17 or S-74 |
| SHELF LIFE | Minimum 12 months |
