Gulf Coast Paint

Cycloaliphatic Epoxies

PC-591 Poly-Chemcure High Build Wet Surface Epoxy Coating

A 100% solids, two component Cycloaliphatic Epoxy Coating.  PC-591 provides very low permeability along with excellent impact and abrasion resistance.  Formulated with a unique moisture insensitive polymer, PC-591 may be applied on wet surfaces, or underwater without effect on cure.  A special resin modification produces a low modulus, flexible film, making PC-591 ideal for painting over existing sound paint without “lifting”.  Recommended for steel and concrete surfaces.  PC-591 is a lower viscosity version of PC-590. PC-591 wet surface epoxy can be rolled without any solvent.

Send Inquiry
SKU PC-591 Categories ,

PRODUCT USES

A wet surface epoxy recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment  facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc. PC-591 is a lower viscosity version of our most popular wet surface epoxy, PC-590.

PRODUCT FEATURES

Self-priming on steel and on most concrete applications.
Can be rolled with no solvent.
Ideal for marginally prepared surface.
Outstanding impact and abrasion.
High film build  – 20 mil DFT per coat on horizontal surfaces.
Excellent coating for manholes.
May be applied on wet or under water surfaces.
Meets all EPA and other air pollution regulations
Cures down to 35°F.

Details

COLORS

White, Lt. Gray, Med. Gray

VOLUME SOLIDS

100%

V.O.C.

0 GMS/L

POT LIFE

40-50 minutes @75ºF

FINISH

Gloss

PACKAGE

1 gallon and 4 gallon kits

APPLICATION TEMPERATURE

40ºF – 120ºF

DRY SERVICE TEMPERATURE

170ºF

MIXING RATIO

3:1 by volume. Mix 3 parts Base (Part A) with 1 part Hardener (Part B)

APPLICATION

Spray, roll, brush

INDUCTION TIME

None