Gulf Coast Paint

Epoxy Coatings

PC-636 Poly-Chemcure Low Temperature Fast Curing Epoxy Mastic

Poly-Chemcure PC-636 is a high performing, surface tolerant, two component, high solids, high build amine cured epoxy designed to cure at temperatures down to 25°F. PC-636 Epoxy is specially modified with a proprietary blend of selective resins, wetting agents and penetrants to provide excellent adhesion and protection of tight, sound, rusty steel surfaces. Depending on the temperature, the fast setting PC-636 can be recoated the same day.

Ideal as a two coat system over marginal prepared surfaces where blasting is impractical or prohibited. PC-636 Epoxy is also used as a high build primer under a wide variety of epoxy and polyurethane topcoats.

Send Inquiry
SKU PC-636 Category

PRODUCT USES

Ideal for structural steel, tanks, vessels, water towers, cooling towers, equipment, pipe lines and racks, metal buildings, fences, cat-walks, bridges, railings, fire escapes, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, petroleum refineries, electric generating stations, coal handling operations, food processing plants, breweries, dairies, dams, locks, marine installations, to name a few.

PRODUCT FEATURES

Low temperature cure to 25°F.
Excellent adhesion to tight, sound rust.
A high build primer or finish coat.
Fast recoating.
Excellent against “undercutting”.
Easy to apply, self priming on steel.
Excellent build to protect sharp edges and crevices.
Tight film, low permeability.
Excellent chemical, abrasion and impact resistance.
Excellent as a coating on concrete.
Good adhesion to moist substrates.
Excellent immersion resistance in fresh and salt water.

Details

COLORS

Cream, Lt. Gray, Med. Gray, Dark Gray, Tile Red, Black

FINISH

Semi Gloss

VOLUME SOLIDS

75% ± 2%

V.O.C.

1.79 lbs/gal., 214 GMS/Liter

COVERAGE (Theoretical)

1203 sq. ft. @ 1.0 mil DFT

PACKAGING

5 gallon, 1 gallon units

MIXING RATIO

4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B)

INDUCTION TIME

15 minutes

POT LIFE

2 hours @ 75°F

APPLICATION

Spray, brush or roller

APPLICATION TEMPERATURE

25°F – 120°F

RECOAT TIME

4 hours @ 75°F (5 dry mils)

DRY SERVICE TEMPERATURE

200°F max

THINNING

5-15% SA-65 Reducer per gallon