Our Products

A two component, multi-purpose, high solids, direct-to-metal (DTM) chemical resistant amine cured epoxy mastic.  Chemical Mastic CM-15 is specially modified with a proprietary blend of selective resins, wetting agents, penetrates and rust inhibitors to provide excellent adhesion to sound, tight, rusty steel surfaces, and to upgrade old, deteriorated coatings. CM-15 is recommended for concrete floors and can be used a base coat for flake floors. Ideal as a coating system over marginal or poorly prepared surfaces where blasting is impractical or prohibited.  Recommended as a high build primer under a wide variety of topcoats.

A two component, high solids, high build, flake filled, Phenolic Epoxy Mastic. PC-517 is based on a cycloaliphatic polyamine cured Epoxy. PC-517 Epoxy can be used as a one coat, 20 mil dry film Epoxy on horizontal surfaces. This unique coating has excellent chemical, abrasion, impact, and weather resistance with outstanding adhesion to marginally prepared surfaces as well as clean blasted surfaces.

A 100% solids, two component Cycloaliphatic Epoxy Coating.  PC-591 provides very low permeability along with excellent impact and abrasion resistance.  Formulated with a unique moisture insensitive polymer, PC-591 may be applied on wet surfaces, or underwater without effect on cure.  A special resin modification produces a low modulus, flexible film, making PC-591 ideal for painting over existing sound paint without "lifting".  Recommended for steel and concrete surfaces.  PC-591 is a lower viscosity version of PC-590. PC-591 wet surface epoxy can be rolled without any solvent.

PC-650 is a two component heavy duty non-skid Epoxy coating. This high performing coating is ideal for industrial, commercial, marine, and other applications. PC-650 helps to provide slip resistance in wet and slippery conditions. Ideal for both new and old concrete surfaces, interior and exterior surfaces. PC-650 is also designed for application on concrete and steel surfaces. Depending on the application, you can use a squeegee or trowel to get a smoother, less aggressive profile. Rolling the product with a phenolic core roller will give you an aggressive finish. This product meets USDA requirements. *Note: this product may chalk or discolor when used as an exterior finish coat.