Gulf Coast Paint

Epoxy Primers

PC-116 Poly-Chemcure Rust Inhibitive Epoxy Primer

PC-116 is a two component, fast curing high build Polyamide Epoxy Rust Inhibitive Primer designed for use as a primer for our epoxy and polyurethane topcoats.  PC-116 helps prevent edge failure and film under-cutting of steel surfaces exposed to corrosive atmos­phere and chemically aggressive environments.   PC-116 can be used where an extended recoat period of up to 6 months is needed.  Proper cleaning of the primer must be done after extended time without a top coat to remove any dust, dirt, grease or oil that may have contaminated the surface.

Send Inquiry
SKU PC-116 Categories ,

PRODUCT USES

Recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc.

PRODUCT FEATURES

Excellent rust preventing properties.
Excellent resistance to “under cutting”.
Long recoat up to 6 months.
Outstanding adhesion and “wetting out” ability.
Fast recoat times.
Great shop coat primer for fabricators.
Good flexibility and abrasion resistance
Excellent film build to protect sharp edges.

Details

COLOR

Lt. Gray

GLOSS

Flat

VOLUME SOLIDS

55%

V.O.C.

3.36 lbs., 403 GMS/L

COVERAGE (Theoretical)

864 sq. ft. @ 1.0 mils DFT

MIXING RATIO

1 by volume Mix 1 part
Base (Part A) to 1 part Hardener (Part B)

INDUCTION TIME

30 minutes

POT LIFE

8 hrs. @ 75°F

APPLICATION

Spray, brush or roller

APPLICATION TEMP

45° – 120°F

MIN. RECOAT TIME

5-6 hours @ 75°F

DRY SERVICE TEMP

200°F max.