PC-145 is an epoxy block filler used to fill and seal block and masonry surfaces in the following areas:
Chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, electric generating plants, petroleum refineries, food processing, dairies, meat packing, bottling plants, poultry plants, breweries, marine applications, manufacturing plants, computer rooms, textile mills, and furniture plants.
Schools, hospitals, nursing and retirement homes, jails, cafeterias, dormitories, rest rooms, locker rooms, showers, kitchens, laundry rooms, laboratories and medical and veterinary clinics.
Car washes, dog kennels, stadiums, arenas, zoos, clean rooms, restaurants, shopping centers, supermarkets and warehouses.
Excellent adhesion to block and masonry surfaces.
Excellent filling properties provide ideal “hold out”.
A base coat for high performing coating systems.
Hard film with high impact and abrasion resistance.
Easy to apply.
Much harder than latex & acrylic block fillers.
Meets requirements for use in food processing plants
Contact us about PC-145 Epoxy Block Filler today!
2.83 LBS/GL (339 GMS/LITER)
75-150 sq. ft. per gallon
10 gallon & 2 gallon kit
1:1 by volume. Mix 1 part Base (Part A) to 1 part Hardener (Part B)
6-8 hours @ 75°F
Spray or roller
24-72 hours @ 75°F, depending on thickness
|DRY SERVICE TEMPERATURE||
Normally none needed
SA-17 or S-74