PRODUCT USES
Recommended as a deep penetrating sealer to protect new and old concrete surfaces from attack by chemicals, water and effects of freeze/thaw cycles. The resulting tight film helps prevent “dusting” of the concrete, spalling, and deterioration.
Excellent sealer for warehouse floors, aisle-ways, parking decks, concrete slabs and walls, bridges, loading docks, exterior walks, runways, dams, driveways, garages, shop floors, and secondary containment areas. PC-149 can be made into a non-skid finish.
Used as a primer for Gulf Coast Paint’s PC-200, CM-15, PC-636, PC-500, PC-517, PC-555, Epoxies, CT-352 and CT-370 Polyurethanes.
PRODUCT FEATURES
Excellent penetration and high “wetting out” properties.
Excellent adhesion to concrete and masonry surfaces.
Good water, salt and chemical resistance.
Prevents “dusting” by increasing strength of concrete surfaces.
Excellent abrasion resistance over concrete.
Designed as a primer for high performance epoxies and polyurethanes.
Protects bond line deterioration.
Excellent against staining.
USDA approved.
Details
| COLOR | Clear and Gray |
|---|---|
| GLOSS | High Gloss |
| VOLUME SOLIDS | 55% ± 2% |
| V.O.C. | 3.23 LBS/GL (387 GMS/Liter) |
| COVERAGE (Theoretical) | 882 sq. ft. per gallon 1.0 DFT |
| RECOMMENDED COVERAGE | 176-294 sq. ft. per gal to yield 3-5 mils DFT |
| PACKAGING | 10 gal. unit, 2 gal. unit |
| MIXING RATIO | 1:1 by volume. Mix 1 part Base (Part A) to 1 part Hardener (Part B) |
| INDUCTION TIME | 30 mins. |
| POT LIFE | 8-10 hrs. @ 75°F |
| APPLICATION | Spray, brush or roller |
| APPLICATION TEMPERATURE | 50°F to 120°F |
| RECOAT TIME | @ 75°F at 3.0 dry mils. Minimum Recoat: 8 hours, or overnight. Maximum Recoat: 48 hours |
| DRY SERVICE TEMPERATURE | 150°F maximum |
| THINNING | Normally none required, can use up to 10% with SA-65 |
| CLEAN UP | SA-17 or S-74 |
| SHELF LIFE | 1 Year Minimum |
