Gulf Coast Paint

Epoxy Floor Coatings and Primers

PC-1803 Poly-Chemcure 100% Solids Epoxy Glaze Clear Coat

Poly-Chemcure PC-1803 is a low viscosity, 100% Solids, solvent free, two component amine cured epoxy. PC-1803 is designed as resin for Color Quarts floors, decorative toppings and other flooring systems. PC-1803 can be used as a primer under epoxy grouts, mortars, toppings, high performance coatings and lining systems. The PC-1803 has been formulated to provide deep penetration into the concrete surface without the use of any solvent, therefore, eliminating any objectionable solvent odor, particularly inside buildings. Also, PC-1803 makes an excellent clear floor finish. One (1) or two (2) coats provide a tough, hard, durable film, which protects against during and surface deterioration.

Send Inquiry

PRODUCT USES

Poly-Chemcure PC-1803 Resin is used as a binder for Color Quartz, vinyl chip, seed-ins, slurries and decorative toppings. PC-1803 is also used as priming concrete surfaces, to bond Epoxy Resurfacers and Overlayments such as epoxy grouts, mortars, toppings, slurries, seed-ins, and power troweled floors. PC-1803 also used as a primer on concrete under high performance epoxy coatings and linings, such as CM-15, PC-500, PC-555, PC-590 and PC-1850. PC-1803 also used as a primer for CT-352 Polyester Polyurethane.

Ideal as sealer coat for new or old concrete surfaces to help prevent penetration of water and chemicals and the effects of freeze/thaw cycles. PC-1803 helps prevent spalling, deterioration and the dusting of concrete.

Ideal for warehouse floors, loading docks, garages, secondary containment areas, aircraft hangars, production areas, sumps, tank pads, pump supports, and other concrete surfaces.

PRODUCT FEATURES

Excellent adhesion to concrete and masonry surfaces.
100% solids formula eliminates any strong solvent odors.
Excellent “anchor” coat for Epoxy Toppings and Overlayments.
Helps eliminate dusting of concrete.
Excellent as a sealer for warehouse and production floors area.
Can be used as a binder for Color Quarts and other decorative floors.
Penetrates and fills small voids and hairline cracks.
Higher coverage rates provide lower cost per square foot.
Approvable for food processing plants.
Good chemical resistance.
Used as a sealer over seamless and decorative floors.

Details

COLORS

Clear

GLOSS

High Gloss

VOLUME SOLIDS

100%

V.O.C.

0 GMS/L

RECOAT TIME

@ 75ºF: 12-24 hours

COVERAGE (Theoretical)

1604 sq. ft. per gallon @ 1.0 mil DFT

PACKAGING

4 gal Kits, 1 gal Kit

MIXING RATIO

3:1 by volume

INDUCTION TIME

None

POT LIFE

20-30 minutes @ 75ºF

APPLICATION

Roller, Squeegee

APPLICATION TEMPERATURE:

50°F – 100°F

THINNING

None

CLEAN UP

SA-17 or S-74 Reducer

SHELF LIFE

1 year minimum